Solution For Industrial Cleaning Wastewater Reuse System,Also called reclaimed water reuse equipment.
overview :
The Solution For Industrial Cleaning Wastewater Reuse System mainly adopts membrane bioreactor (MBR) technology, . This is a new process that combines biological treatment technology and membrane separation technology. Youdaoplaceholder3 aims to efficiently carry out solid-liquid separation, , thereby obtaining stable reclaimed water that can be directly used. The MBR technology significantly enhances the system's solid-liquid separation capacity by using membrane modules to replace the secondary sedimentation tank in traditional processes, . At the same time, it can maintain a high concentration of microorganisms in the biological tank, , and reduces the process's excess sludge.
Solutions and advantages of reclaimed water reuse equipment:
In the pretreatment stage, the focus is on removing residual chlorine from water. A reduction system design is adopted to address the fatal impact of excessive residual chlorine on reverse osmosis membranes
2. In terms of reverse osmosis arrangement, a higher recovery rate is designed without affecting the service life of the equipment
3. For the selection of reverse osmosis membranes, Dow reverse osmosis membranes from the United States are chosen. The effluent quality is stable and the PH value cleaning range is relatively high
4. In terms of operation control, an automatic operation design is adopted to reduce the impact of human error on the equipment belt
5. In terms of management mode, the concept of process management and continuous improvement is adopted to achieve customer satisfaction and meet the requirements of ISO9001.
Design basis of Industrial Cleaning Wastewater Reuse System:
| order number | name | content |
| 1 | device name | Industrial Cleaning Wastewater Reuse System |
| 2 | Water quality of production | Conductivity is less than or equal to 10μS/cm; (monitoring by online instrument; temperature 25℃) |
| 3 | Raw water quality | Conductivity is less than or equal to 400μS/cm, flow rate is 2t/h. |
| 4 | capacity | 1t/h, temperature 25℃. |
| 5 | percent recovery | Primary reverse osmosis: 55-65%. |
| 6 | technology | Pre-treatment sand filter, carbon filter, UF filtration, precision filter, RO reverse osmosis. |
| 7 | Method of sterilization | Sand carbon automatic backwashing, ultraviolet sterilization. |
| 8 | control method | PLC+HIM automatic control. |
| 9 | Scope of equipment | From the inlet of the raw water tank to the outlet of RO (excluding the terminal water supply pipe). |
Process diagram of Industrial Cleaning Wastewater Reuse System
For a complete technical solution Of Industrial Cleaning Wastewater Reuse System, please contact me. We will customize the design based on your product technical requirements and factory layout.
Product Tags:
|
|
Stable Operation Industrial Water Recycling System with MBR Technology and Corrosion Resistance for Industrial Cleaning Wastewater Reuse Images
|
